Not long ago, we filmed an episode for my television series, "Growing a Greener World," which was all about composting. To this day, we get many requests for the instructions on how to build the three-bin system made from used shipping pallets that I constructed during the episode.
The beauty in the design was its simplicity, low cost and the ability to repurpose some of those ubiquitous pallets that pile up everywhere. With a drill and a few all-weather screws, anyone can assemble a multiple-bin pallet composting system quickly and cheaply.
Pallets are made from all different types of wood. For a compost bin, it's preferable to find those that are rot resistant, such as oak or cedar. Pine although easy to find, does not stand up to the elements as long. For strength and durability, you can't beat hardwood.
Also be aware that pallets from one manufacturer to another are not always uniform in size. For this system, it's preferable that they're all the same size. It makes for a better looking finished product and helps during assembly to have one uniform size.
Most importantly, choose pallets that have not been chemically treated. The most common treatment methods for pests and pathogens are either heat-treating (marked on the pallet with "HT") or fumigation, using Methyl Bromide (marked MB). Stick with heat-treated or new virgin wood if you can find it.
Start with a level surface for the area where your system will set and assemble it in place. For my setup, you will need seven pallets: one for each outer wall, two for the dividers to separate the bins, and three across the back. Assembly is straightforward and intuitive. I simply started by attaching the left outer wall pallet to the back pallet with several screws. Then I added one of the inner pallet dividers and secured it against the back pallet. With the remaining pallets, work your way across for the next two sections in this same manner.
The assembly was so fast and easy, I felt like I wanted to spiff mine up some more. Although totally unnecessary, I liked the idea of having a cover over the bin that would hold my finished compost.
My improvised solution consisted of a cut-to-fit sheet of corrugated plastic screwed to a wooden frame made of 2x2 pine.
I then attached two hinges to the fame and secured them to the outside of the back pallet.
You can watch the composting episode and see just how I built this bin here: http://www.growingagreenerworld.com/episode225/
Joe Lamp'l is the host and executive producer of Growing a Greener World on national public television, and the founder of The joe gardener® Company, devoted to environmentally responsible gardening and sustainable outdoor living.